The LIS series pneumatic horizontal shock tester is suitable for products that cannot be tested by changing the direction of
placement (changing the direction of the impact force by 90° into a vertical shock direction), for example, some slender products are launched in the longitudinal direction and at the simulated level. For tests, etc., it is necessary to use a horizontal shock test rig to complete the shock test.
APPLICATION
The equipment is used to detect early faults, simulate actual working condition assessment and structural strength test.
The product has a wide range of applications, wide application range, and remarkable and reliable test results.
model | LIS50 | LIS100 | LIS200 | LIS400 | LIS600 | LIS1000 | LIS1800 | |||||
Shock test parameters | ||||||||||||
specified load (kg) | 50 | 100 | 200 | 400 | 600 | 1000 | 1500 | |||||
Table size(mm*mm) | 500*700 | 500*700 | 500*900 | 600*1000 | 700*1000 | 800*1300 | 1800*1800 | |||||
Peak impulse acceleration | Half sinusoidal waveform(m/s²) | 15-1000 | 15-1000 | 15-800 | 15-600 | 15-500 | 15-400 | 15-800 | ||||
Pulse duration | Half sinusoidal waveform(ms) | 1-40 | 2-40 | 2.5-40 | 3-40 | |||||||
Impact distance (mm) | 650 | 600 | 550 | 500 | ||||||||
Maximum speed change (No load)(m/s) | 7.8 | 7.8 | 7.2 | 7.2 | 7.0 | 6.8 | 4.0 | |||||
Maximum speed change (No load)(m/s) | 7.0 | 7.0 | 6.5 | 6.5 | 6.3 | 6.0 | 3.5 | |||||
Crash test parameters | ||||||||||||
Collision pulse waveform | Half sine wave | |||||||||||
Collision peak acceleration (m/s²) | 15-80 | |||||||||||
Collision pulse duration (ms) | 1-40 | 1-40 | 2-40 | 2.5-40 | 3-40 | |||||||
Collision distance automatic adjustment range | 1-80 | 1-60 | 1-40 | |||||||||
Maximum speed change (m/s) | 2.3 | 2.3 | 2.1 | 2.0 | 1.8 | 1.6 | (not) | |||||
Configuration air source | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | 1.6 | |||||
Configure the air source (collision) (m³/min/8kg/cm²) | 1.6 | 2.0 | 3.0 | 3.2 | 4.0 | (not) | ||||||
Whether to configure the gas tank | (not) | (not) | (not) | Need 3m3 gas storage tank | Need 3m3 gas storage tank | Need 3m3 gas storage tank | Need 3m3 gas storage tank | |||||
Table weight(kg) | 2800 | 2800 | 3260 | 3800 | 4900 | 5800 | 8500 | |||||
(L*W*H)(mm) Dimensions | 2750*820*710 | 2750*820*710 | 2950*820*710 | 3210*920*710 | 3210*1020*710 | 3510*1120*710 | 3740*2100*915 | |||||
Control System | ASK01 | |||||||||||
measuring system | MIS02 | |||||||||||
Platform power requirements | 220V±10%, (Simple Phase) AC,50Hz,2kVA | |||||||||||
Air compressor power requirements | 380V±10%,(Three phase) AC,50Hz | |||||||||||
Air compressor power (kVA) | 11 | 15 | 15 | 22 | 22 | 30 | 30 | |||||
Temperature range | 0℃-40℃ | |||||||||||
Humidity | ≤90%(25℃) No condensation | |||||||||||
Applicable standard | GB/T2423.5,GB/T2323.6,IEC 68-2-29 |
technical consulting(Vibration test table test standard, selection)
Scheme design(Provide a variety of reliable design solutions according to customer needs)
Program optimization(Answer questions, select and optimize the solution according to the actual situation)
Progress notification(Give equipment production progress in real time, keep communication and guarantee delivery time)
Installation preparation(Perform equipment guidance equipment debugging before installation to ensure accurate parameters)
Warranty 1 years(24 months to provide standard on-site service, equipment maintenance)
Technical support(Provide permanent and free customer consultation and technical guidance services)
Technical Training(Free equipment training, routine maintenance, and troubleshooting)
Regular return visit(Conduct regular return visits to eliminate hidden dangers for equipment purchased by customers)
Online Services(7 x 24 hours online service, ready to respond to customer needs)
(7 x 24 hours online service, ready to respond to customer needs)
24-hour online mobile phone
Address: Jianqiao Industrial Park, No. 8, Lianhua 7th Street, Lianhutang, Tangxia Town
Dongguan, Guangdong, China